T-MAX UV GLASS Γυαλί προστασίας Case Friendly Fullcover 3D FULL CURVED 0.3MM  για HUAWEI P30 PRO - ΔΙΑΦΑΝΟ

Full-UV Adhesive Full Glue Edge-to-Edge wth Full Installation Kit Tempered Glass

The innovative T-Max glass has a surface hardness (degree of resistance) of 9H, which is why it is extremely scratch-resistant even in contact with sharp objects (knife, keys). In addition, it is coated with a special oleophobic coating that reduces the amount of fingerprints or other impurities.

T-Max is glued with a liquid substance on the entire surface of the screen and then the substance is hardened using a UV lamp. Thanks to this combination, we get the perfect effect of smoothness, clarity and responsiveness on the screen.

Check how to mount: https://www.youtube.com/watch?v=W3QKLhnncGE

* We do not recommend using 3D glass without any housing.
** We do not recommend the use of T-Max glass if the casing overlaps the edges of the screen too much.
*** Remember to remove and re-add your fingerprint after installing the film / glass on the screen.
**** The functionality of the fingerprint reader in the screen may be disturbed if the film / glass coating is installed. The fingerprint reader is not fully developed at this angle.
***** The assembly has been simplified to the maximum, but you must remember to read the instruction manual before the installation and watch the instructional video and follow all the steps set by the manufacturer, only this way you will get 100% satisfaction.
****** Glass after disassembly leaves no trace on the screen.

-100% Original
-Hardened tempered glass, 0.3 mm thick
- Resistance up to 9H
- Not affecting the sensitivity of touch
-Addition resistant to fat and fingerprints with nano
-Profile edges 2,5D
- Packed in original packaging

1 x T-Max glass
1 x UV lamp
1 x Installation tools

Γράψτε μια αξιολόγηση

Παρακαλώ συνδεθείτε ή δημιουργήστε λογαριασμό για να αξιολογήσετε